Transform Your Bath Space - Installation Guide For New Shower Units

Transform Your Bath Space - Installation Guide For New Shower Units

Blog Article

Request Estimate

We've stumbled upon the article on How to Install a Direct-to-Stud Shower Enclosure down the page on the internet and thought it made sense to share it with you on this site.

A successful shower setup requires careful planning and also a great deal of job. Most of the times, you will certainly require to do three types of tasks: framing wall surfaces, setting up the plumbing, and finishing walls.

Prep work

To start with, you have to choose the type of shower that you desire to mount. It is very important to determine whether the chosen shower can managing specific systems and can regulate a secure degree of water through the central heating boiler. Most shower devices nowadays are created to be flexible to different water pressures (such as saved warm water as well as cold keys).
It is likewise essential to think about the water pressure and the preparation of the piping as well as drainage for the shower

Various Kinds Of Shower Units

Push-on Mixer: The hose pipe and spray parts of the push-on mixer shower device can be connected to the bathroom tap according to your requirement, and also the water temperature level can be adjusted using the taps. Push-on mixers are cheap and exceptionally easy to mount. Nevertheless, although the hose connection is straightforward, it is quickly dislodged. In addition, it is inconvenient to change the temperature.

Bath/Shower Mixer: The tube and spray of this sort of shower are incorporated with a bathroom mixer tap, as well as the temperature level can be changed through the bathroom taps. It is an extremely inexpensive alternative and no added plumbing is involved. Nonetheless, the bath/shower mixers also struggle with bothersome temperature control alternatives.

Handbook Mixer: The hose pipe and also spray of a manual mixer shower device are a part of the wall surface system and also the hot and cold water products are connected to a solitary valve The temperature and also pressure of the water are managed via either one or a range of handles (in more costly showers). Although temperature level control is a lot easier in manual mixer kinds, they are extra expensive than the previously pointed out mixers. They also need added plumbing of hot and cold water pipes.

Thermostatic Mixer: The pipe as well as spray of this shower kind are a part of the wall device and also the hot and cold water materials are attached to a single valve right here also. It is complete with an integrated stabiliser to self-adjust the water temperature and to avoid it from coming to be as well warm. Among the most significant advantages of a thermostatic mixer shower kind includes practical temperature level control. Nevertheless, it is one of the most pricey of the different mixer options.

Power Shower: A power shower is a single unit including a powerful electric pump that is capable of altering both the water pressure and temperature level. This sort of shower can be fitted if there is water from a cold water tank and also a warm water cylinder. A power shower makes the adjustment of both stress and also temperature level very easy. On the other hand, it disagrees for water heated up straight by the shower or where the water is supplied by a combination central heating boiler under mains pressure.

Electric Shower: An electric shower is plumbed into a mains cold water supply as well as it heats up the water electrically. It is very important to keep in mind that for this shower kind to be mounted, the keys stress requires to be at least 0.7 kg/sq centimeters (10lb/sq in). The device enables the temperature level as well as stress to be readjusted by means of a handle. Designs with temperature stabilisers are better as they stay unaffected by various other faucets somewhere else being used within the family. A significant drawback of electric showers is that the control knob just enables the choice of high temperatures at less pressure, or lower temperature levels at a higher pressure. This is problematic in the winter when the spray is usually weak and also the mains water is colder. However, this problem is taken on in some designs which are available with a winter/summer setup.

Method

Depending upon the type of shower you want to install, the shower head have to either be suited order to avoid its contact with the water in the bathroom below or the base tray, or it has to have a check valve.
Prior to starting, it is a good idea to mark the placements of the shower head and control, and to intend the pipe-work involved. Additionally, the water drainage system to remove the drainage will require to be intended. Both positions of the cord course and the shower button will also need to be taken into consideration if an instantaneous or electric shower device is being installed.
Utilize the guideline guide offered with the shower system to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is very important to remove the water. In order to protect the pipelines, they need to be given a water resistant covering as well as additionally fitted with isolating shutoffs. The pipelines can then be buried right into the wall surface and also plastered over to neaten the general appearance.
Fit the base tray, shower head, and fittings.
Attach the primary shower control to the pipelines that will certainly be supplying the water (This may need a female screw string adapter).
Reconnect the water and test the pipelines for any kind of leakages, as some may need tightening up.
If you are mounting an electric shower, bear in mind to switch off the power supply before making any electrical links. As soon as these links have actually been made (there must be advice within the instruction manual), the power supply can be switched back on.

Adjusting Water Pressure to Fit Your Shower

The cold water reservoir can be lifted to a higher elevation (often as low as 150mm (6inches)) by installation a solid wooden support below it - potentially made up of struts and also blockboards. If you pick this option, the primary and also circulation pipelines will certainly also have to be increased to fulfill the brand-new elevation of the reservoir.
Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is picked, it must be connected right into the power supply in order to run.

Piping as well as Water drainage

It is best to make use of 15mm size supply pipelines, and also make the go to the shower as brief as well as straight as feasible so regarding keep optimal pressure and minimise heat loss. Furthermore, by minimising using elbow joints for pipe corners, you can decrease the resistance in the circulation of the water. You can attain this by flexing the pipelines rather.

Most Common Mistakes

Violating or disregarding local code restrictions.

Using pipelines that are as well little.

Connecting copper to galvanized without making use of a brass or dielectric suitable in between both.

Not utilizing tape or pipeline compound at threaded joints.

Not leveling your fixtures when installing them.

Not installing an air space filling up for fixtures.

Cutting supply stub outs too short to install the shutoff valves onto after the ended up wall surface remains in location.

Not appropriately lining up tubing right into fittings or stop valves. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will create a leakage.).

When transforming the water back on in your home, always run the outside tube shutoff or purge your bathrooms to bleed dust and also air from the lines. This particles can trigger problems in your sink taps and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I am very fascinated by How to Install a Freestand and I really hope you enjoyed reading the entire blog entry. Sharing is good. Who knows, you may very well be helping someone out. Thank you so much for going through it.

Book A Free Estimate

Report this page